Відео

Where can I download the templets' to outline on the foam in different sizes? Are there any other downloads that would be helpful? Thank you very much.

Hi! I’ve had my beamo for over three years and I’ve only tried using it twice. Do you provide personal training and or do you know if anyone that does?

you missed the most important reason and no what you do recalibrate ect still shows error turns out if you print core had a failed print and is full of material around print head and when you pull it out you could break off one of the wire to the drop down cover which is the the level sensor this will need resoldering back

Tnx a lot bro 🧡

Do they grow? I mean, I have Pro 2. And it was the same size of Pro. Its just not fair.

Tq is really helpful. I use this to calibrate my uni printer😅 and i learner it my subject additive manufacturing

Awesome tutorial! Thanks for all the information. :) I'm tryring to make a logo on a box with thicker lines. The logo layer (on top side of the box) is 1mm thick and its part of the model, so I made a support blocker that covers only the logo but not the side of the box underneath. For this support blocker I set "Modify settings for overlaps" and via "select" button I added "horizontal expansion" and set that to 0.4. But when I slice the model, the logo is still without any changes. When I change the "horizontal expansion" for the whole model (standard way, not via "per model settings"), the logo gets thicker how I need it. In the basic form this logo contains some thin walls, so I need to have them a bit thicker, so they don't break off that easily and they will be better printed.

9-10 years later, thank you! Also, that little bit at the end where you explain how to put the fan and heatsink together. A lot of people would be hyper fixated on the original idea and not mention that! Awesome!

obrigado gajo logo pago-te um fino🍻

Are the modified hands available for download? I am looking at making Power Armor from Fallout for Halloween and I have been looking for some hands for it. This is exactly what i had in mind.

Thanks for the video, short and straight to the point - it worked for me and I didn't even need to carefully check the separation between the metal plate and the glass build plate.

Thank you for the video sir, this helped me a lot!

How to I got 3d printed below knee prosthesis in india

You’re the salt of the earth brother. The world’s a better place because of you!

I have not 3d printer make body part how make it

THANK YOU SO MUCH

Well Done! Thanks!

So freakin cool guys!!!!

This is hilarious! Love it!!

Wish there was more online about the xl. Just like he talked about, i am torn between the S7 and the method XL. We want to build up prototypes in a wide array of materials, but also want the precision and reliability and final product quality. That talk of set profiles to just run the abs cf out of the no hassle just slice and go makes me want the method. 😅 Theres pros and cons to each and neither meets all our needs. If i could afford both i would, but im not sure it makes sense when one could probably do the job till i could afford another. Im really leaning toward the s7 and getting the xl in another iteration or two when it's had time to mature.

bros 9 years ahead of us

Thanks so much for the clear review. I'm trying to decide on a soluble support filament and it seems like there's no consensus out there!

I cant get it to work. i have the right settings on the cube but when i slice it still shows the same stuff as the rest of the model...

If you buy the optional F cartridge is it easy to change the cartridge from HT to F?

Dont just talk and not action show the actual printing to proven the product is wokring well and printing quality are good.

What settings did you use for the aquasys? I set it up per instructions on the label and website, and cannot get it to extrude nicely and keep getting clog issues.

It’s probably a good idea to “Unload Filament” first…

Thank you! Excellent tutorial, all the series are fantastic! -- BUT, I have one thing, I can't open custom scripts on your site, because each link open 404 page.. Could somebody give me this codes, I have the old monster (Creator X), and I want to printing on it ))

THANK YOU !!!!!!!!!!!!!!!!!!!!!!!!!! SUBSCRIBED

The algorithm brought me here

One of the better Cura tutorial videos I've seen.

Can anyone tell me what kind of string they are using? Thank you.

Nice

Would be a good purchase at $200 instead of $2000. $2000 is outrageous. Maybe Bambu Lab will make one to go with their printers.

i'd love it if it wasn't so expensive. please make a hobbyist version. i have a bambu printer and it's crazy that this dryer is more expensive than the whole printer.

Is there a automatic material system available?

wow TWO thousand dollars????? I think that's probably out of range for most hobbyist.

Very helpful thank you very much

Got a sandy hook add, guess you tube has made more off this then Alex Jones 😂 gross

How you think this scanner will work for large objects like car parts?

i cant decide between the Mole and POP3 Scanner. Which one would you pick?

what prusaslicer or slicer setting did you use to print with alginate?

That was cooler than I figured it would be

Hello, I wanted to know what the average consumption of the UltiMaker 2+ Connect is, thank you.

Cool video. Would be nice to see some more prints or compare the print quality to other printers. This printer is a good 5,000+ more than the average 3D printer.

How much it?

👏

How is this different than a cheap Chinese dental vacuum former/molder? You know, at the basic level......